Valid 70-743 Dumps shared by PassLeader for Helping Passing 70-743 Exam! PassLeader now offer the newest 70-743 VCE dumps and 70-743 PDF dumps, the PassLeader 70-743 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader 70-743 dumps with VCE and PDF here: http://www.passleader.com/70-743.html (278 Q&As Dumps –> 314 Q&As Dumps –> 351 Q&As Dumps)
BTW, DOWNLOAD part of PassLeader 70-743 dumps from Cloud Storage: https://drive.google.com/open?id=0B-ob6L_QjGLpdUZlRVBrYVdFb28
QUESTION 73
You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016. You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies. Which component must you install for the planned deployment?
A. the Routing role service
B. the Canary Network Diagnostics feature
C. the Network Controller server role
D. the Data Center Bridging feature
Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/dn859239.aspx
QUESTION 74
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput. VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the single root I/O virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS). You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run in the host of VM1?
A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterSriov
D. Set-NetAdapterQoS
Answer: A
Explanation:
The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on a network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors by hashing the header of the incoming packet. Without RSS Windows Server 2012/2016; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS.
QUESTION 75
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3. You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?
A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
D. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
Answer: A
QUESTION 76
You have a server named Server1 that runs Windows Server 2016. You plan to deploy Internet Information Services (IIS) in a Windows container. You need to prepare Server1 for the planned deployment. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Install the Container feature.
B. Install Docker.
C. Install the Base Container Images.
D. Install the Web Server role.
E. Install the Hyper-V server role.
Answer: ABC
Explanation:
Step 1 (A): The container feature needs to be enabled before working with Windows containers. To do so run the following command in an elevated PowerShell session.
Enable-WindowsOptionalFeature -Online -FeatureName containers -All
Step 2 (B): Docker is required in order to work with Windows containers.
Note:
First install the OneGet PowerShell module.
Install-Module -Name DockerMsftProvider -Repository PSGallery -Force
Next, you use OneGet to install the latest version of Docker.
Install-Package -Name docker -ProviderName DockerMsftProvider
Step 3 (C): Install Base Container Images. Windows containers are deployed from templates or images. Before a container can be deployed, a container base OS image needs to be downloaded. The following commands will download the Nano Server base image.
docker pull microsoft/nanoserver
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploy-containers-on-nano
QUESTION 77
Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts. You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?
A. From Server Manager, install the Host Guardian Service server role on a domain controller.
B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
D. From Server Manager, install the Host Guardian Service server role on both servers.
Answer: C
Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps. To configure constrained delegation:
* Open the Active Directory Users and Computers snap-in.
* From the navigation pane, select the domain and double-click the Computers folder.
* From the Computers folder, right-click the computer account of the source server and then click Properties.
* In the Properties dialog box, click the Delegation tab.
* On the delegation tab, select Trust this computer for delegation to the specified services only.
* Under that option, select Use Kerberos only.
https://technet.microsoft.com/en-us/library/cc720385(v=ws.10).aspx
https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx
QUESTION 78
Hotspot Question
You have a four-node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1. You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node. What command should you run? (To answer, select the appropriate options in the answer area.)
Answer:
QUESTION 79
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016. Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1. Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3. Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only. You need to ensure that you can perform the migration of VM1 to Server2. What should you do?
A. Add the Server computer account to the Replicator group on Server1 and Server2.
B. Modify the Delegation settings on the Server3 computer account.
C. Modify the Storage Migration settings on Server3.
D. Modify the Cluster permissions for Cluster1.
Answer: B
Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps. To configure constrained delegation:
* Open the Active Directory Users and Computers snap-in. For example, to do this from Server Manager, select the server if it not already selected. After the server is selected, click Tools, and then click Active Directory Users and Computers. This opens the Active Directory Users and Computers snap-in.
* From the navigation pane, select the domain and double-click the Computers folder.
* From the Computers folder, right-click the computer account of the source server and then click Properties.
* In the Properties dialog box, click the Delegation tab.
* On the delegation tab, select Trust this computer for delegation to the specified services only.
* Under that option, select Use Kerberos only.
* Click Add.
etc.
https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx
https://technet.microsoft.com/en-us/library/cc720385(v=ws.10).aspx
QUESTION 80
Hotspot Question
You have a Windows Server 2016 failover cluster that has a cluster network named ClusterNetwork1. You need to ensure that ClusterNetwork1 is enabled for cluster communication only. What command should you run? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation:
Box 1: Get-ClusterNetwork. Cluster network roles can be changed using PowerShell command: Get-ClusterNetwork. For example: (Get-ClusterNetwork “Cluster Network 1”). Role =1
Box 2: Role. Cluster Network Roles: Cluster networks are automatically created for all logical subnets connected to all nodes in the Cluster. Each network adapter card connected to a common subnet will be listed in Failover Cluster Manager. Cluster networks can be configured for different uses. Three roles:
* Disabled for Cluster Communication (value 0)
* Enabled for Cluster Communication only (value 1)
* Enabled for client and cluster communication (value 3)
https://blogs.technet.microsoft.com/askcore/2014/02/19/configuring-windows-failover-cluster-networks/
Get the newest PassLeader 70-743 VCE dumps here: http://www.passleader.com/70-743.html (278 Q&As Dumps –> 314 Q&As Dumps –> 351 Q&As Dumps)
And, DOWNLOAD the newest PassLeader 70-743 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=0B-ob6L_QjGLpdUZlRVBrYVdFb28