Valid 70-243 Dumps shared by PassLeader for Helping Passing 70-243 Exam! PassLeader now offer the newest 70-243 VCE dumps and 70-243 PDF dumps, the PassLeader 70-243 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader 70-243 dumps with VCE and PDF here: http://www.passleader.com/70-243.html (185 Q&As Dumps)
BTW, DOWNLOAD part of PassLeader 70-243 dumps from Cloud Storage: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc
QUESTION 136
You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. You have two device collections named Collection1 and Collection2. All of the client computers in the marketing department are in both device collections. Configuration Manager has the client settings configured as shown in the following table.
Remote Tools is disabled for all three client settings. You need to enable Remote Tools for the marketing department computers. What should you do?
A. Enable Remote Tools in Settings2.
B. Enable Remote Tools in Settings1.
C. Create a new client setting that enables Remote Tools.
D. Enable Remote Tools in the Default Client Settings.
Answer: A
Explanation:
1 is the highest priority. When you create a client setting a priority is assigned to it, those with a higher priority win over settings with a lower priority. Note that the default client settings has the priority of 10000, which means you can have 9999 client settings that would have higher priority over the default client settings.
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
QUESTION 137
Drag and Drop Question
You have an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. Server 1 is a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) primary site server. You plan to install a primary site on Server2. You need to ensure that Configuration Manager is managed centrally. The solution must minimize administrative effort. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
1. Uninstall Endpoint Protection on Server 1
2. Join Hierarchy on Server 1
3. Install Primary Site on Server 2
QUESTION 138
You are a network administrator tor a company named Litware, Inc. The network contains an Active Directory forest named litwareinc.com. The forest contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. Client Push is enabled. Litware acquires a company named Contoso, Ltd. Contoso has an Active Directory forest name contoso.com. The contoso.com forest contains a System Center 2012 Configuration Manager environment. The environment contains a single site. You configure a two-way forest trust between the forests. You need to ensure that all of the client computers in the contoso.com forest are managed by System Center 2012 R2 Configuration Manager Service Pack 1 SP1 in the litwareinc.com forest. What should you do?
A. Uninstall the System Center 2012 Configuration Manager site server.
B. Configure Active Directory System Discovery in System Center 2012 R2 Configuration Manager Service Pack 1 SP1.
C. Configure Active Directory Forest Discovery in System Center 2012 R2 Configuration Manager Service Pack 1 SP1.
D. Reinstall the System Center 2012 Configuration Manager client on all of the client computers in contoso.com.
Answer: B
QUESTION 139
Your company has a main office and a remote office. The main office has 3,000 users. The remote office has 600 users. You deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) at the main office. You need to ensure that users at the remote office can use Configuration Manager to start bare metal installations of operating systems over the network. The solution must minimize the number of services deployed at the remote office. Which two features should you deploy at the remote office? Each correct answer presents part of the solution.
A. a state migration point
B. a server locator point
C. a PXE-enabled distribution point IS
D. a management point
E. Windows Deployment Services (WDS)
Answer: DE
Explanation:
D:
If the link speed is decent and reliable plus the number of computers managed at this location is relatively low, the admin’s best option is to deploy a local Distribution Point in the remote office. To deploy operating systems to Configuration Manager clients that make PXE boot requests, you must use one or more distribution points that are configured to respond to the PXE boot requests. The distribution point then responds to the PXE boot request and determines the appropriate deployment actions to take.
E:
Before you install the distribution point, ensure that Windows Deployment Service is installed on the site system server.
https://technet.microsoft.com/en-us/library/gg712266.aspx
QUESTION 140
You create a windows 8.1 VHD named Image.vhd in configuration manger. You need to ensure that you can import Image1.vhd to VMM. What should you do first?
A. Install the VMM console on Server3.
B. Configure the System Center setting on Server5.
C. Modify the NTFS permissions for the distribution share on Server2.
D. Modify the VMM library settings on Server5.
Answer: A
QUESTION 141
Hotspot Question
You have a system Center 2012 R2 Configuration Manager Service Pack1 (SP1) deployment that contains the servers configured as shown in the following.
You plan to deploy client computers by using the operating system deployment feature. You need to configure the environment to ensure that operating system can be deployed by using operating system deployment. What should you do? Select the appropriate options.
Answer:
Server 3 and open ports: TCP 20.21.80. and UDP 53
QUESTION 142
Drag and Drop Question
Your network contains a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) environment that has a PXE-enabled distribution point. You create a custom image that will be deployed only to client computers in the marketing department. You create a new collection named Marketing computers. You need to deploy the image to a client computer named Copmuter1 in the marketing department. The solution must ensure that you deploy the image with the minimum amount of user intervention. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Create a boot image task.
Add Computer1 to the Marketing Computers collection – 1
Start Computer1 by using the pre-Bot Execution Environment (PXE) – 4
Create a task sequence to install the custom image – 2
Deploy the task sequence to the all Unknown Computers collection.
Start Computer1 by using the Windows Preinstallation Environment (Windows PE)
Deploy the task sequence to the marketing Computers Collection – 3
QUESTION 143
You create a domain user named User1. The domain user are member of the local groups on each client computer as described in the following.
You plan to configure client Push installation. You need to configure the client push installation account. The solution must use the principle of least privilege. What should you do?
A. Configure User3 as the client Push installation account
B. Specify User5 as the manager of the Clients OU, and then configure User5 as the client push installation account
C. Add User1 to the Client Admins group, and then configure User1 as the client push installation account
D. Configure User1 as the client push installation account
Answer: C
QUESTION 144
Drag and Drop Question
Your network contains a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) environment. Your company currently does not manage software updates. The company plans to use Configuration Manager to deploy updates to 600 client computers that run windows 8.1 Pro and 3000 client computers that run windows 8.1 Enterprise. You need to deploy updates to the client computers by using Configuration Manager. Which five action should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Scan all of the client computers – 3
Configure a software update point – 4
Synchronize software updates – 2
Create a software updates deployment – 5
Run the setup for windows server update services (WSUS) – 1
QUESTION 145
You have a central Administration site named CS1 two primary sites named S01 and S02. You discover that inventory data S01 is unavailable in CS1. You need to ensure that the inventory data from S01 is available in CS1. Which tool should you use?
A. The Microsoft Remote Connectivity Analyzer
B. The Microsoft Message Analyzer
C. The Network Diagnostics tool
D. The replication link Analyzer
Answer: D
QUESTION 146
Your network contains a system centre 2012 R2 configuration manager services pack 1 (SP1) environment. You have an application named App1 version 1.0 of App1 installed on some client computers. Version 1.1 of App1 installed on other client computers. You need to identify which of the client computers has version 1.0 installed. What should you do?
A. Select Collect NOIDMIF files in Hardware Inventory
B. Modify the Enable software inventory on client setting
C. Modify the Enable hardware inventory on client setting
D. Add a file name to software metering
E. Add a WMI class to the Sms-def.mof file
Answer: B
QUESTION 147
You create a new collection named Sales Computers. You receive a new client computer named Sales99 for sales department. You need to deploy the image to sales99. The solution must ensure that you deploy the image with the minimum amount of user intervention. Which four actions should you perform in sequence?
Option:
Create a boot image task
Create a task sequence to install the custom image
Add saless99 to the sales computers collection
Deploy the task sequence to the all Unknown Computers collection
Start Sales99 by using the pre-Bot Execution Environment (PXE)
Answer:
Create a boot image task – 1
Create a task sequence to install the custom image – 2
Start Sales99 by using the pre-Bot Execution Environment (PXE) – 3
Add saless99 to the sales computers collection – 4
QUESTION 148
You have a deployment of a system Centre 2012 R2 configuration manager services pack 1 (SP1). Your company has three different hardware builds for client computers. You use the operating system deployment feature to deploy windows 7 to the computers. You plan to deploy windows 8.1 by using operating system deployment. The deployments will be used to perform in-place upgrades, operating system refreshes, and bare-metal deployments. You need to identify which method to use to create configuration managers for the deployment. The solution must minimize the number of images. What should you do?
A. Add one Configuration Manger operating system image by using Install.wim from the windows 8.1 installation media.
B. Create a build and capture the task sequence for each hardware build.
Add three Configuration Manager operating system images.
C. Manually create a reference system for each hardware build, and then capture the images.
Add three Configuration Manager operating system images.
D. Create one pre-staged media.
Answer: C
Explanation:
ConfigMgr 2012 SP1 involves five general steps (but with some welcome new features) when deploying operating systems. These steps include:
1. Install Prerequisites for OS Deployment
2. Prepare Boot Images
3. Add Operating System Image
4. Define a Task Sequence
5. Deploy a Task Sequence
Note that when deploying a customized operating system image, an additional step is required to build and capture the customized image prior to defining a task sequence to deploy it in Step 4.
https://blogs.technet.microsoft.com/keithmayer/2013/02/06/5-steps-to-deploying-windows-8-with-system-center-2012-service-pack-1-migration-and-deployment-part-3-of-19/
QUESTION 149
You manage a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) deployment. You need to create a custom report that will query the current hardware inventory data. The solution must minimize the possibility that the functionally of the report will be affected by any future services packs of configuration Managers. What should you include in the query?
A. V_GS_COMPUTER_SYSTEM
B. Computer_System_PRODUCT_DATA
C. Computer_System_Data
D. V_HS_COMPUTER_SYSTEM
Answer: C
Explanation:
The V_GS_COMPUTER_SYSTEM Hardware inventory view lists information about theConfiguration Manager clients, including domain, computer name, Configuration Manager roles, status, system type, and more.
QUESTION 150
You create a new Active Directory user named User1. You create a new collection that contains the servers in PS1 and PS2. You need to ensure that User1 can perform the following tasks in SP1 and SP2:
– Modify alerts
– Set maintenance windows
– Deploy application to servers
The solution must minimize the number of permission assigned to User1. What should you do?
A. Add User1 as an administrative user.
Assign the Full Administrator security role to User1.
Remove the Default security scopes of the type Collection from User1.
Add the new Collection to the scope of User1.
B. Add User1 as an administrative user.
Assign the Full Administrator security role to User1.
Remove all of the Collection scopes from User1.
Add the new Collection to the scope of User1.
C. Add User1 as an administrative user.
Assign the infrastructure security role to User1.
Remove the Default security scopes of the type Collection from User1.
Add the new Collection to the scope of User1.
D. Add User1 as an administrative user.
Assign Application Administrator security role to User1.
Remove all of the Collection scopes from User1.
Add the new Collection to the scope of User1.
Answer: D
Get the newest PassLeader 70-243 VCE dumps here: http://www.passleader.com/70-243.html (185 Q&As Dumps)
And, DOWNLOAD the newest PassLeader 70-243 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc